Dresden Express™ 12
Pointed Blade Quilt Block

Instructions are for 8 1/2" unfinished block using 7" Dresden Blades

Smaller blocks can be made utilizing smaller Dresden Blades.
Block background fabric square should be cut 1-1/2" larger than length of selected Dresden Blade size. (Example: When using 4" blades, cut background fabric to 5 1/2" square.)

Materials:
Background block fabric
Three assorted fabrics for blades
Thread

Instructions:
From background fabric, cut an 8 1/2" Square

Cut three blade fabrics in 7" strips.

Lay fabric strips on cutting mat. Place Dresden Express™ 12 on fabric strip aligning the bottom horizontal line of ruler with the bottom edge of the fabric.

Make sure the fabric straight of grain will run down the center of the blade as indicated on the ruler.

In succession; cut along one outside edge of ruler, in center slots, and opposite outside edge of the ruler. This will create three identical Dresden blades. Layer fabric strips to cut multiple fabric blades at one time.

For Pointed Top: Fold each blade lengthwise, right sides together. Sew across the top wide edge using 1/4" seam allowance. Trim inner corner, turn right sides out and press with seam down the center.

Using a 1/4" seam allowance, stitch three blades together beginning at top and stopping 1/4" from narrow bottom edge. Press all seams to one side. Turn under 1/4" the bottom raw edge of the three blades and press.

Place three-blade unit on background fabric square aligning raw edges. Applique as desired.

Suggestion for a Four-Block Section

Suggestion for Four-Block Sections repeated to create a quilt