| ---Frequently Asked Questions--- | Quilting Products--- | FAQ – Shape Cut™ | |
| Frequently Asked Questions |
 |
| Questions | ||||
| What is the Shape Cut™? | ||||
| What is the Short Cut ruler? | ||||
| How many layers of fabric can I use with my Shape Cut™? | ||||
| What increments can I cut with the Shape Cut™? | ||||
| What shapes can I cut with Shape Cut™? | ||||
| Can I use the Shape Cut™ to cut bias strips? | ||||
| I accidentally placed my hot iron on my Shape Cut™ and now it has warped. Is there anyway I can regain its original shape? | ||||
| What are the directions for the Shape Cut™? | ||||
| Answers | ||||
| What is the Shape Cut™? | ||||
| The Shape Cut™ is a 12" x 12"
slotted quilting ruler for quick and accurate cutting. Your rotary
cutter will fit nicely into the laser cut slots of the Shape Cut™.
Simply lay your fabric on top of your cutting mat, place the Shape
Cut™ on top of your fabric to cut strips and shapes quickly
and accurately. Back To Questions |
||||
| What is the Short Cut ruler? | ||||
The Short Cut ruler is the Shape Cut™
ruler. The name changed to Shape Cut™ shortly after the product
was introduced. It is uncommon to still find a "Short Cut"
ruler. |
||||
| How many layers of fabric can I use with my Shape Cut™? | ||||
You can cut through up to 8 layers
of fabric with the Shape Cut™ ruler, helping you save time
on repetitive cuts. |
||||
| What increments can I cut with the Shape Cut™? | ||||
| You can use the cutting slots to safely
cut multiple strips in increments from 1/2" to 12" with
the Shape Cut™. Back To Questions |
||||
| What shapes can I cut with Shape Cut™? | ||||
After you have cut strips, simply turn
the Shape Cut™ to complete squares, triangles, diamonds or
chevrons quickly and accurately. |
||||
| Can I use the Shape Cut™ to cut bias strips? | ||||
| The Shape Cut™ has 45-degree markings
that allow you to cut bias strips quickly and accurately. The cutting
slots are also great for cutting fringe. Back To Questions |
||||
| I accidentally placed my hot iron on my Shape Cut™ and now it has warped. Is there anyway I can regain its original shape? | ||||
| The Shape Cut™ is made of a sturdy,
thick plastic. If exposed to high or intense heat, it can warp. Exposing
the plastic to direct sunlight for an extended period of time could
also cause it to warp. Some plastics are susceptible to damage from
direct sunlight and heat. The Shape Cut™ plastic cannot handle
extreme heat exposure. Unfortunately, the Shape Cut™ will most
likely not regain its original shape once it has warped. Back To Questions |
||||
| What are the directions for the Shape Cut™? | ||||
| Click
this link for the directions for the Shape Cut™ Back To Questions |
||||
